What is the impact of LED power supply on the service life of LED equipment？

Know the Causes and Remedies ！

A ripple effect is an electric isse first detected in LED lights and refers to the sudden flickering of the light output. Ripple effects happen when electricity suppliers reduce the amount of energy they are sending to a certain geographical area.

This happens in an attempt to offset on-peak demand for electricity and the capacity of the grid to accommodate and supply power.

On-peak demand usually occurs when most people are at home and are consuming large amounts of electricity. It often coincides with the morning rush, between 7 and 10am, before leaving for work and schools, and also with an evening rush, between 5 and 10pm, upon returning from work and settling down before bed.

As the electricity suppliers lower the amount of energy provided to the area to meet the electricity demand, all the households in the area start receiving less energy. As a result, the electric current passing through the LED lights decreases, and since LED lights already consume very small amounts of power, this decrease causes a disturbance in the output and leads to the flickering of the lights.

To put things into perspective, standard halogen bulbs use approximately 50 Watts, while LED bulbs, although known for their solid features and durability, consume around 5Watts.

It is important to remember that there are other factors which could contribute to the severity of the ripple effect, such as the operation of the air conditioning system. Air conditioners consume large quantities of electricity which it draws from the household current. Especially at start-up, the units draw a considerable amount of current that effectively lowers the currents going to the lights.

There are a variety of other reasons that could cause a ripple effect in LED lights, but it’s worth noting that light flickering can actually be quantified, measured and controlled to limit the effect of flickering using special solutions.

How to Resolve Flickering?

There are three main ways to help resolve the ripple effect in your home, listed below from the least to the most cost efficient way to tackle the issue. These solutions will vary by area of residence and severity of the problem.

The first option is to get more electrical current to your lights. This can be achieved by turning off the dimming capability. The lights will effectively pull more current as they provide higher output, limiting the flickering problem but effectively increasing the power consumption.

The second option involves installing a load bypass filter. This device is usually installed on the first lamp of each circuit and/or behind the wall switch. The bypass filter improves the dimming of the LED lights and the switching performance of the lights causing issues.

The third option which tackles the problem directly is installing a ripple signal filter. This filter is specifically tuned to eliminate the ripple effect signal frequency and is typically installed on the electrical board.

Ripple Effect and LED lights

Although it’s usually said to be imperceptible in LED lights, long exposure to flickering light can have a range of effects on humans, going from unnoticed effects, to slight discomfort all the way to significant adverse effects.

The range of effects vary with the detectability of the light flickers. The human brain can detect light flicker frequencies up to 100 Hz and 200Hz, from LED drivers output ripple, even though they are often not visible to the naked eye.

Prolonged exposure to constant flickering of light could cause neurological problems for sensitive people. This problem is quite common for adolescents, and is a very uncomfortable problem to have for yourself.

Symptoms are generally headaches, eye tension, vision impairment, and in rare cases, epileptic seizures could be a potential complication. That’s why it’s advisable to completely avoid flickering lights.

The Ripple effect in LEDs can also have a significant negative impact on the LED driver’s life.

High ripple effects caused by fluctuations in the electric current could weaken or at the least shorten the lifespan of LED drivers or power supplies, especially when this is a frequent occurrence. The LED driver is an essential component of the system and crucial to its operation, damaged electronics in the driver from the ripple effect can severely disrupt the proper functioning of the LED.

LED lights are generally quite efficient, however, a high ripple effect can drastically reduce the efficiency of the lights.

Causes of the Ripple Effect in LED lights?

Ripple effects are a common problem for LED lights and can be caused due to a number of reasons, most of which have simple solutions. Considering the negative implications the ripple effect has on our health and on the lighting system, the issue should not be ignored.

Once detected, proper measures need to be taken to get to the root cause of the problem and to find the appropriate solutions. Below is a list of some of the causes of the ripple effect. 

Electrical Distribution

The main cause of the ripple effect is linked to the fluctuation of the electrical distribution to a particular area at a given time, due to high-peak and off-peak electricity demands.

To manage the varying electrical current in a space, appliances may draw more or less current to regulate their operation, leaving LED lights with weaker currents that cause them to flicker.

Effectively when there’s a sudden drop in electrical supply to the household, provided for the same high number of operating appliances, the ripple effect is bound to occur within the lights.

LED Light Drivers

Another common reason for the ripple effect is from using a driver that does not match the specifications of the LED light. Manufacturers’ recommendations for LED drivers should be followed to avoid operation problems.

Understanding the topology of LED drivers and the complete characteristics of the system are essential to avoid flickering issues in particular and to maintain high quality of operation in general.

Excessive Load on the Circuits

Overloaded circuits with several electronics and appliances could cause frequent instabilities in the current distribution and lead to the occasional flickering of LED lights.

Excessive Usage of Electricity

Although LED lights generally operate at low wattages compared to traditional sources of light, general over-use of electrical appliances and equipment, especially during off-peak electricity periods, can cause the overall circuits in the house to draw more electric current. This limits the currents for LED lights causing them to flicker.

Loose Wiring

Simple issues like loose wiring could lead to unstable or fluctuating current at the light bulbs, causing them to flicker. Professional help should be seeked from a certified electrician to tighten or adjust loose circuiting and wiring.

How to minimize the ripple effect

Although ripple effects are sometimes unavoidable, they can occur due to several factors. There are, however, possible solutions to limit and avoid the ripple effect within the household. This depends on the severity of the cause and implications of the ripple effect in the area.

Possible solutions are:

• Ensure all LED products and devices are synchronized with the control circuits and power supply.
• Install a ripple signal filter to give an alert on ripple effects and to limit their frequency.
• Use a current-matching LED driver.
• Ensure that the correct dimmer is used for the particular LED lights installed.

High quality power supply recommendations

By using our high-quality LED power supply, we can eliminate the impact of ripple current on LED equipment, remove flashing lights, and protect your health.

Our LED power supply uses gemcon high-quality capacitor and bp3126 control chip to reduce the damage of ripple current to LED equipment, avoid light flashing, and protect your health and your LED equipment